รายละเอียดของร้านค้า ข่าวสารของร้านค้า รายการสินค้า วิธีการชําระเงิน ติดต่อเรา
๏ฟฝ๏ฟฝ๏ฟฝ๏ฟฝ๏ฟฝ๏ฟฝ

จำหน่ายสินค้าเครื่องจักรอุปกรณ์ในโรงงานอุตสาหกรรม, เครื่องมือวัดอุณหภูมิ ความชื้น, Temperature and Humidity Data Logger เป็นต้น

ให้บริการจัดหาหรือเทียบรุ่น สำหรับอุปกรณ์เครื่องจักรที่ตกรุ่น เลิกผลิต หรือ หายาก

ให้บริการออกแบบ ปรับปรุง ซ่อมบำรุง เครื่องจักรต่าง ในโรงงานอุตสาหกรรม

ให้บริการออกแบบประกอบตู้ควบคุมเครื่องจักร

ให้บริการซ่อม อุปกรณ์ไฟฟ้าในโรงงานอุตสาหกรรม เช่น Invertor, Servo Drive, Oven Controller เป็นต้น

จำหน่ายสินค้าเครื่องจักรอุปกรณ์ในโรงงานอุตสาหกรรม, เครื่องมือวัดอุณหภูมิ ความชื้น, Temperature and Humidity Data Logger เป็นต้น

ให้บริการจัดหาหรือเทียบรุ่น สำหรับอุปกรณ์เครื่องจักรที่ตกรุ่น เลิกผลิต หรือ หายาก

ให้บริการออกแบบ ปรับปรุง ซ่อมบำรุง เครื่องจักรต่าง ในโรงงานอุตสาหกรรม

ให้บริการออกแบบประกอบตู้ควบคุมเครื่องจักร โปรแกรม PLC ทุกรุ่น ทุกยี่ห้อ

ให้บริการซ่อม อุปกรณ์ไฟฟ้าในโรงงานอุตสาหกรรม เช่น  Inverter, Servo Drive, Oven Controller เป็นต้น

ติดต่อ มือถือ : 081-916-7954 

Email : thanasarn@atproengineer.com

 http://www.atnine.com/

http://www.atproengineer.com/

CMT0310 อุปกรณ์วัดค่าอุณหภูมิ -30 ํC ถึง 80 ํC
รหัสสินค้า: 000083
การเชื่อมต่อ: เชื่อมต่อกับ PC ผ่านพอร์ท RS232
การรับประกัน: 2 ปี
รายละเอียด:

ใช้งานร่วมกับอุปกรณ์สื่อสาร, ในโรงงานอุตสาหกรรม และระบบปรับอากาศ

Temperature, humidity, barometric pressure sensors with serial interface RS232

  • temperature
  • barometric pressure
  • relative humidity
  • dew point temperature
  • absolute humidity
  • specific humidity
  • mixing ratio
  • specific enthalpy

Measured temperature, relative humidity, barometric pressure are converted to digital serial output with RS232 link parameters. Transmitters are available in wall-mount, duct-mount and bar types. Also types with T+RH probe on a cable are available.

Large dual line LCD for display of temperature, humidity, pressure or other calculated humidity interpretation is an advantage. Computerized design ensures maximum long term stability and fail indication. The transmitter works with ModBus RTU communication protocol or with Advantech ADAM compatible protocol. Protocol is user selectable in special configuration mode by means of the PC. Serial link enables to read actual readings and modify transmitter configuration. Instrument works always in slave mode, i.e. responds only to master device query.
The Tx31x RS232 transmitters can be powered directly from the COM port of the PC or from external ac/dc adapter.

 

Ask more information on availability of other communication protocols.

State-of-the-art capacitive polymer humidity sensor excels in mechanical stress, temperature shock, dew resistance as well as in large linearity range and low hysteresis. Transmitters are designed for use in non-aggressive environment.

APPLICATIONS - measuring of temperature, humidity, pressure at:

  • building HVAC management
  • building HVAC automation
  • warehouses
  • glasshouses
  • manufacturers
  • museums, archives, galleries
  • air-conditioned rooms
  • weather stations
COMMON TECHNICAL PARAMETERS
 
Supported temperature units: degrees Celsius, degrees Fahrenheit
Temperature sensor: RTD Pt1000-3850ppm/°C
Operating temperature range of the case with electronics: -30 to +80°C,
recommended to switch OFF LCD display over +70°C
Accuracy: ±0.4°C
Measuring relative humidity range: 0 to 100%
Accuracy: ±2.5% RH from 5 to 95% at 23°C
Accuracy and range of dew point temperature output:
- for more details see graphs
±1,5°C at ambient temperature T<25°C and RH>30%
range -60 to +80 °C
Accuracy and range of absolute humidity output: ±3g/m3 at ambient temperature T < 40°C
range 0 to 400 g/m3
Accuracy and range of specific humidity output: ±2g/kg at ambient temperature T < 35°C
range 0 to 550 g/kg
Accuracy and range of mixing ratio output: ±2g/kg at ambient temperature T < 35°C
range 0 to 995 g/kg
Accuracy and range of specific enthalpy output: ±3kJ/kg at ambient temperature T < 25°C
range: 0 to 995 kJ/kg
Accuracy and range of barometric pressure output: ± 1.3hPa at 23°C
range: 600 to 1100hPa
Supported pressure units: hPa, kPa, mbar, mmHg, inHg, inH2O, PSI, oz/in^2
Temperature compensation of the humidity sensor: from -30 to +125°C
Power: 9 to 30 V DC, current consumption approximately 6mA
Protection - temperature and humidity transmitters: IP65 electronics with terminals,
IP40 humidity and temperature sensors
Protection - transmitters measuring pressure: IP54 electronics with terminals,
IP40 humidity and temperature sensors
Filtering ability of sensor cover: 0.025mm - filter from stainless steel mesh
Communication protocol: ModBus RTU and Advantech ADAM compatible protocol
  Description of communication protocols in pdf format
Communication speed: 110 to 115200 Bd
Warranty: two years

เว็บไซต์ที่เกี่ยวข้อง: http://www.cometsystem.cz/english/hygrometer-rs232.htm
Tell a Friend
CMS3120 เครื่องวัดอุณหภูมิและความชื้นบันทึกค่าได้ วัดอุณหภูมิช่วง -30 ํC ถึง 70 ํC
รหัสสินค้า: 000151
การเชื่อมต่อ: เชื่อมต่อกับ PC ผ่านพอร์ท USB หรือ LAN
การรับประกัน: สินค้ารับประกัน 2 ปี
รายละเอียด:

ใช้ในอุตสาหกรรมอาหารและยา รวมถึงการควบคุมอุณหภูมิและความชื้นของห้องเก็บสินค้าและวัตถุดิบ

Humidity and temperature data loggers

Hygrometer - thermometer is designed for record of relative humidity, temperature, dew-point, optionally in combination with universal input 0-5V. Relative humidity and temperature values are stored to a non volatile electronic memory. Data transfer to the personal computer for further analysis is performed via USB, RS232, GSM or Ethernet interface by means of a proper adapter.

Main applications of hygrometer:

  • Food and beverage industry (HACCP)
  • Pharmaceutical industry
  • Horticulture and cultivation of plants
  • HVAC (heating, ventilation, air conditioning, cooling)
  • Building and energy management
  • Research and development
  • Laboratories (GLP)
  • Warehouses
  • Technological processes
  • Museums, archives, galleries

Advantages of hygrometer:

  • included traceable calibration certificate from the manufacturer - Comet
  • fast data transfer to the PC (full memory for approximately 30s)
  • variability of connection to the computer - USB, RS232, Ethernet, GSM modem
  • permanent connection to the PC enabled, data is possible to download even during logging
  • large data memory 32000 values
  • large dual line display with special symbols, switchable
  • optional display of minimum and maximum measured values (reset of min/max memory from PC or by magnet)
  • dual level alarm is enabled for each channel, alarm is indicated by blinking of the value on the LCD display or LED diode
  • two alarm modes are enabled: instant or with memory (detected alarm is indicated permanently till alarm memory is cleared from the PC)
  • robust watertight case
  • easy installation, locking enabled
  • low power consumption from battery, battery life up to 7 years
  • indication of remaining battery life, easy replacement of the battery
  • it is possible to combine temperature and humidity measurement with two user calibrated 0-5V voltage signals
  • logging start/stop is enabled in several ways: at certain time and date programmed from computer, by delivered magnet
  • also special logging mode is enabled, when logging runs only, if some of measured values are out of adjusted alarm limits
  • each data logger is possible to describe with text of maximum 32 characters
  • each channel is possible to describe with text of maximum 16 characters
  • password protection is enabled to prevent unauthorized manipulation with logger
COMMON TECHNICAL PARAMETERS OF HYGROMETER
Operating temperature range of data logger R3120, R3121 without display: -30 to +80°C
Operating temperature range of data logger S3xxx with display: -30 to +70°C
Accuracy of temperature measurement of internal sensor: ±0.4°C
Accuracy of the S3631 data logger Pt1000 input without probe: ±0.2°C from -50 do +100°C
±0.2% from reading from +100 to +260°C
±0.4% from reading from -90 to -50°C
Accuracy of air humidity measurement: ±2.5% RH from 5 to 95% at 23°C
Accuracy of dew point measurement: ±0.5°C from 30 to 95% RH
Resolution of the reading: 0.1°C, 0.1%RH
Real time clock: year, leap year, month, day, hour, minute, second
Data logging interval: adjustable from 10s to 24h (1minute to 24h in low-power mode)
Display and alarm refresh: each 10 s (each 1 minute in low-power mode)
Total memory capacity: 32000 temperature, humidity values in noncyclic logging mode
Data logging modes: noncyclic - data logging stops after filling the memory
cyclic - after filling memory oldest data is overwritten by new
Dimensions without connectors: data logger with display 93x64x29mm
data logger without display 93x64x26mm
Power: Lithium battery 3,6V, size AA
Typical battery life in low-power mode (1minute sampling): 7 years R3120, R3121
6 years S3120, S3121, S3631, S3541
Typical battery life in fast mode (10 second sampling): 3 years R3120, R3121
2.5 years S3120, S3121, S3631, S3541
Battery life in continuous on-line mode with interval 1 minute: reduced to 70% of the above lives in fast mode
Battery life in continuous on-line mode with interval 10 second: 1 year
Protection of loggers with internal sensors: IP67 - protected against influence of temporary immersion into water, RH+T sensors are covered with a plastic cover with IP30 protection
Protection of S3121, R3121 loggers with cable probe: IP67 - protected against influence of temporary immersion into water, RH+T sensors are covered with a stainless steel mesh with IP40 protection. Filtering ability 0,025mm
Warranty: 2 years
เว็บไซต์ที่เกี่ยวข้อง: http://www.datalogger.cz/english/relative-humidity-dataloggers.htm
Tell a Friend
CMG0221E เครื่องวัดอุณหภูมิชนิดพิมพ์ค่าได้ สำหรับรถห้องเย็น วัดอุณหภูมิในช่วง -90 ํC ถึง 260 ํC
รหัสสินค้า: 000163
การเชื่อมต่อ: เชื่อมต่อกับ PC ผ่านพอร์ท USB
การรับประกัน: สินค้ารับประกัน 2 ปี
รายละเอียด:



ใช้กับรถขนส่งที่ต้องการควบคุมอุณหภูมิขณะขนส่ง มีระบบแจ้งเตือนขณะทำงาน



Temperature recorder with printer T-PRINTG0221E - dual channel thermometer

temperature recordtemperature recordtemperature record






Print-out of temperature graph and temperature table



USE:




  • print-out of temperature record during transport of food, pharmaceuticals, flowers, live animals and other goods


  • designed especially for installation in driver´s cabin


  • easy installation



FEATURES:




  • record from one or two temperature probes


  • two binary inputs for event record - door opening, fridge unit operation - G0241 model


  • Delivery Ticket, Journey Ticket and Multi Day printouts


  • selectable numerical and graphical print-out


  • print from the last record to the history till button is pressed


  • print up to set hour in current day


  • print of set number of hours to the history


  • fast print to usual 57mm thermo paper in 10m rolls


  • large graphic illuminated display


  • indication of temperature exceeding by LED and acoustically


  • approximately 3400 record lines/one paper roll


  • record of actual or average values


  • calculated MKT - mean kinetic temperature for storing of pharmaceuticals in the PC program


  • cyclic record - after filling the memory oldest records are overwritten by new


  • no need to download data - large 1MB memory stores up to 5 years of record permanently in memory


  • USB interface for record download to the PC


  • RS232 link for GSM modem connection - G0241 model


  • free PC software


  • fifteen selectable languages, e.g. English, German, French, Italian, Polish, Dutch, Spanish, Portuguese, Romanian, Czech


  • degrees of Celsius and Fahrenheit


  • included traceable calibration certificate


  • TÜV SÜD certified to conform to EN 12830, Class 1 and EN 13486, Class 1 for the transport of food

























TECHNICAL PARAMETERS




Measuring temperature range:


-90 to +260°C

(-130 to +500°F)



Operating temperature range:


-30 to +65°C



Operating temperature range of the printer:


-20 to +50°C



Compatible temperature probes:


with Pt1000/3850ppm sensor (-90 to +260°C)



Accuracy of the input without probe:


±0.2°C



Resolution:


0.1°C



Logging interval:


user selectable from 1 minute to 60 minutes



Memory capacity:


1MB - 172 032 records from one probe,

102 400 records from two probes (up to 5 years with 15 minutes interval and one probe)



Power:


9 to 32Vdc, protected against alternator load shedding + internal Lithium battery



Consumption while printing:


approximately 8 W



Consumption - not printing:


approximately 0.1 W



Dimensions without connectors and holders:


175 x 124 x 51 mm

(w x h x d)



Weight:


approximately 430 g



Protection:


IP20



Warranty:


2 years
เว็บไซต์ที่เกี่ยวข้อง: http://www.datalogger.cz/english/temperature-datalogger-built-in-printer.htm
Tell a Friend
CMT0410 อุปกรณ์วัดค่าอุณหภูมิ -30 ํC ถึง 80 ํC
รหัสสินค้า: 000071
การเชื่อมต่อ: ส่งข้อมูลผ่าน RS485
การรับประกัน: 2 ปี
การรับประกัน: 2 ปี
รายละเอียด:

ใช้งานร่วมกับอุปกรณ์สื่อสาร, ในโรงงานอุตสาหกรรม และระบบปรับอากาศ

Temperature, humidity, barometric pressure sensors with serial interface RS485

  • temperature
  • barometric pressure
  • relative humidity
  • dew point temperature
  • absolute humidity
  • specific humidity
  • mixing ratio
  • specific enthalpy

Measured temperature, relative humidity, barometric pressure are converted to digital serial output with the RS485 link parameters. Transmitters are available in wall-mount, duct-mount and bar types. Also types with T+RH probe on a cable are available. Model T3419P is designed for compressed air measurement up to 25 bars.
Transmitter circuitry is galvanically isolated from power circuitry to prevent collision in RS485 network.
Large dual line LCD for display of temperature, humidity, pressure or other calculated humidity interpretation is an advantage. Computerized design ensures maximum long term stability and fail indication. The transmitter works with ModBus RTU communication protocol or with Advantech ADAM compatible protocol. Protocol is user selectable in special configuration mode by means of the PC. Serial link enables to read actual readings and modify transmitter configuration. Instrument works always in slave mode, i.e. responds only to master device query.

Ask more information on availability of other communication protocols.

State-of-the-art capacitive polymer humidity sensor excels in mechanical stress, temperature shock, dew resistance as well as in large linearity range and low hysteresis. Transmitters are designed for use in non-aggressive environment.

APPLICATIONS - measuring of temperature, humidity, pressure at:

  • building HVAC management
  • building HVAC automation
  • warehouses
  • glasshouses
  • manufacturers
  • museums, archives, galleries
  • air-conditioned rooms
  • weather stations
COMMON TECHNICAL PARAMETERS
 
Supported temperature units: degrees Celsius, degrees Fahrenheit
Temperature sensor: RTD Pt1000-3850ppm/°C
Operating temperature range of the case with electronics: -30 to +80°C,
recommended to switch OFF LCD display over +70°C
Accuracy: ±0.4°C
Measuring relative humidity range: 0 to 100%
Accuracy: ±2.5% RH from 5 to 95% at 23°C
Accuracy and range of dew point temperature output:
- for more details see graphs
±1,5°C at ambient temperature T<25°C and RH>30%
range -60 to +80 °C
Accuracy and range of absolute humidity output: ±3g/m3 at ambient temperature T < 40°C
range 0 to 400 g/m3
Accuracy and range of specific humidity output: ±2g/kg at ambient temperature T < 35°C
range 0 to 550 g/kg
Accuracy and range of mixing ratio output: ±2g/kg at ambient temperature T < 35°C
range 0 to 995 g/kg
Accuracy and range of specific enthalpy output: ±3kJ/kg at ambient temperature T < 25°C
range: 0 to 995 kJ/kg
Accuracy and range of barometric pressure output: ± 1.3hPa at 23°C
range: 600 to 1100hPa
Supported pressure units: hPa, kPa, mbar, mmHg, inHg, inH2O, PSI, oz/in^2
Temperature compensation of the humidity sensor: from -30 to +125°C
Power: 9 to 30 V DC, power consumption approximately 0.5W
Protection - temperature and humidity transmitters: IP65 electronics with terminals,
IP40 humidity and temperature sensors
Protection - transmitters measuring pressure: IP54 electronics with terminals,
IP40 humidity and temperature sensors
Filtering ability of sensor cover: 0.025mm - filter from stainless steel mesh
Communication protocol: ModBus RTU and Advantech ADAM compatible protocol
Hygrometer - communication protocol in pdf Description of communication protocols in pdf format
Communication speed: 110 to 115200 Bd
Warranty: two years

เว็บไซต์ที่เกี่ยวข้อง: http://www.datalogger.cz/english/humidity-transmitters-rs485.htm
Tell a Friend
CMH3020อุปกรณ์วัดค่าอุณหภูมิและความชื้น -30 ํC ถึง 80 ํC
รหัสสินค้า: 000109
การเชื่อมต่อ: Relay output (2A) 2 จุด และเชื่อมต่อกับ PC ผ่านพอร์ท USB
การรับประกัน: 2 ปี
รายละเอียด:

ใช้สำหรับงานควบคุมอุณหภูมิและความชื้นภายในโรงงานอุตสาหกรรม

Temperature, Humidity, Regulators with Relay Outputs

  • temperature
  • relative humidity
  • dew point temperature
  • absolute humidity
  • specific humidity
  • mixing ratio
  • specific enthalpy

Humidistats are designed for two-state control of e.g. heating, ventilation, humidifier, dehumidifier, etc.
Transmitter is equipped with two relay outputs for alarm indication or control of external devices. Each relay can be assigned to any measured or computed value. For each relay setting of delay, hysteresis, audible alarm is enabled.
Measured temperature and relative humidity is recalculated to other humidity interpretations - dew point temperature, absolute humidity, specific humidity, mixing ratio or specific enthalpy.
Parameters are easy adjustable from regulator keyboard or from the computer. Large dual line LCD for simultaneous display of temperature, relative humidity or other calculated humidity interpretation is an advantage.
State-of-the-art capacitive polymer sensor ensures excellent calibration long term stability, inertia against water and condensation. Transmitter is designed for use in non-aggressive environment.
Models H3061P and H3021P are designed for compressed air measurement up to 25 bars.

HUMIDISTAT APPLICATIONS

- temperature and humidity control
- monitoring of temperature, humidity:

  • building management and automation
  • server rooms
  • telecommunication devices
  • warehouses, glasshouses
  • manufacturers
  • museums, archives, galleries
  • air-conditioned rooms, HVAC
  • weather stations
COMMON TECHNICAL PARAMETERS
 
Maximum switching voltage, current of relay output
- models H3060, H3061:
250Vac, 8A

New !
Maximum switching voltage, current of relay output
- models H3020, H3021, H3023:
50V, 2A, 60VA
Audible alarm: from built-in beeper - switchable
Supported temperature units: degrees Celsius, degrees Fahrenheit
Accuracy of temperature measurement: ±0.4°C from -30 to +100°C, ±0.4% from reading over +100°C
Range of relative humidity measurement: 0 to 100%
Accuracy of relative humidity measurement: ±2.5% relative humidity from 5 to 95% at 23°C
Accuracy of temperature measurement: ±0.4°C from -30 to +100°C
±0.4% from reading over +100°C
Accuracy and measuring range of dew-point temperature:
- for more details see graphs
±1,5 °C at ambient temperature T < 25°C and RH>30%
range -60 to +80 °C
Accuracy and measuring range of absolute humidity: ±3g/m3 at ambient temperature T < 40°C
range 0 to 400 g/m3
Accuracy and measuring range of specific humidity: ±2g/kg at ambient temperature T < 35°C
range 0 to 550 g/kg
Accuracy and measuring range of mixing ratio: ±2g/kg at ambient temperature T < 35°C
range 0 to 995 g/kg
Accuracy and measuring range of specific enthalpy: ± 3kJ/kg at ambient temperature T < 25°C
range: 0 to 995 kJ/kg
Operating temperature range of the case with electronics: -30 to +80°C
Operating temperature range of LCD display: readable up to operating temperature +70°C, it is recommended to switch off LCD over +70°C
Range of temperature compensation of RH sensor: -30 to +125°C
Filtering ability of sensor cover: 0.025mm - filter from stainless steel mesh
Protection: IP65 electronics with terminals,
IP40 humidity and temperature sensors
Power
- models H3060, H3061:
110 to 240V / 50Hz to 60Hz
New !
Power
- models H3020, H3021, H3023:
9-30Vdc
Dimensions of the case: 135 x 136 x 45 mm (W x H x D)
Warranty: 2 years

เว็บไซต์ที่เกี่ยวข้อง: http://www.datalogger.cz/english/humidity-regulators.htm
Tell a Friend
CMHx531R Monitoring อุณหภูมิ ความชื้น ความดัน พร้อมเพิ่มได้อีก 3 input ติดตั้งกับ server rack
รหัสสินค้า: 000007
ราคา 0.00 บาท
การเชื่อมต่อ: เชื่อมต่อกับ PC ผ่านพอร์ท LAN
การรับประกัน: 2 ปี
รายละเอียด:

ตรวจสอบและแจ้งเตือนอุณหภูมิกับความชื้น สำหรับติดตั้ง rack server บันทึกสัญญาณ รับสัญญาณ binary เพิ่มได้ 3 จุด เพื่อติดตั้งอุปกรณ์เพิ่ม เช่น smoke detector, flood detector, ups alarm, door status เป็นต้น

Rack mount server environment monitor Hx531R

Also known as: remote server environment monitoring, computer room monitor, data center thermometer, temperature humidity IP sensor, computer room temperature alert

  • temperature
  • humidity
  • power presence
  • flood
  • smoke
  • air flow
  • room entry

Server monitoring system is designed for 19-inch rack mounting, the height is one rack unit - 1U.
Model H4531R is prepared for connection of external Pt1000 temperature probe and models H3531R, H7534R are equipped with 1 meter temperature + humidity probe. Unit also contains three binary inputs for detection of two-state events - e.g. power presence, water, smoke, airflow, glass break detection, door contact.
Rack unit provides 5Vdc and 12dc power supply for external all sensors and detectors.
Large dual line LCD for simultaneous display of temperature, humidity is an advantage. Parameters are easy adjustable from transmitter keyboard or from the computer.
State-of-the-art capacitive polymer sensor ensures excellent calibration long term stability, inertia against water and condensation.
Environmental monitor is equipped with two relay outputs for alarm indication or control of external devices. Each relay can be assigned to any measured value.

 

PRELIMINARY !

Easy creation of online data acquisition system from Ethernet sensors by using new low cost software Comet Database Sensor Monitor - see also Accessories.

 



APPLICATIONS - online monitoring of temperature, humidity, power, flood, smoke, airflow, room entry at:

  • server and computer rooms
  • data centers
  • rack monitoring
  • industrial Ethernet
  • building management and automation
  • telecommunication devices
เว็บไซต์ที่เกี่ยวข้อง: http://www.datalogger.cz/english/server-environment-monitor.htm
Tell a Friend
CMS5011 เครื่องวัดแรงดันบันทึกค่าได้ 32000 ค่า วัดแรงดัน 0-5 V และสัญญาณ binary ผ่าน connector
รหัสสินค้า: 000156
การเชื่อมต่อ: เชื่อมต่อกับ PC ผ่านพอร์ท USB, LAN หรือส่งข้อมูลไร้สายผ่านโมเด็ม
การรับประกัน: สินค้ารับประกัน 2 ปี
รายละเอียด:

ใช้ในอุตสาหกรรมการผลิต หรือภายในห้องทดลอง

Data logger for current 0-20mA,
voltage 0-5V and binary signal

Data loggers are designed for record of voltage signal 0-5V (optionally 0-10V) or current signal 0-20mA. At the same time state of binary signal can be recorded. Values are stored to a non volatile electronic memory. Data transfer to the personal computer for further analysis is performed via USB, RS232, GSM or Ethernet interface by means of a proper adapter.

Main applications of data logger:

  • Distant places with no electric power
  • Long term field measurement
  • Research and development
  • Laboratories
  • Technological processes

Advantages of data logger:

  • included traceable calibration certificate from the manufacturer - Comet
  • fast data transfer to the PC (full memory for approximately 30s)
  • variability of connection to the computer - USB, RS232, Ethernet, GSM modem
  • permanent connection to the PC enabled, data is possible to download even during logging
  • large data memory 32000 values
  • large dual line display with special symbols, switchable
  • optional display of minimum and maximum measured values (reset of min/max memory from PC or by magnet)
  • dual level alarm is enabled for each channel, alarm is indicated by blinking of the value on the LCD display
  • two alarm modes are enabled: instant or with memory (detected alarm is indicated permanently till alarm memory is cleared)
  • robust watertight case
  • easy installation, locking enabled
  • low power consumption from battery, battery life up to 6 years
  • indication of remaining battery life, easy replacement of the battery
  • logging start/stop is enabled: at certain time and date programmed from computer, by external binary signal or by delivered magnet
  • also special logging mode is enabled, when logging runs only, if some of measured values are out of adjusted alarm limits
  • input signal is recalculated and displayed in real measured physical units by means of the PC software
  • each logger is possible to describe with text of maximum 32 characters
  • each channel is possible to describe with text of maximum 16 characters
  • password protection is enabled to prevent unauthorized manipulation with logger
TECHNICAL PARAMETERS
Measurement accuracy: ±0.2% FS
Resolution of voltage input: 13 bits (8192 levels)
Resolution of current input: 7900 levels
Signal character at binary input: from potential-less contact or two-state voltage signal
Minimum pulse duration at binary input: 500 ms (shorter pulses may not be recorded)
Maximum frequency at binary input: 0.5 Hz (i.e. maximum 5 pulses for 10 s)
Power current through contact at binary input: 3 uA (contact closed)
Voltage accross open contact at binary input: maximum 3.6 V
Low voltage level at binary input: 0 to +0.2 V (maximum current from the input 3 uA
High voltage level at binary input: +3.0 to +30 V (maximum current to the input 100 nA
Data logging interval: adjustable from 10s to 24hours
Display refresh and alarm state refresh: every 10 s
Total memory capacity: 32000 values (in non cyclic mode)
Data logging modes: noncyclic – logging stops after filling the memory
cyclic – after filling memory oldest data is overwritten by new
Operation temperature range: -30 to +70°C
Real time clock: year, leap year, month, day, hour, minute, second
Built-in connector for input signals: Canon 9 pins, male
Dimensions without connectors: 93x64x29mm
Weight including battery: 130g
Power: Lithium battery 3,6V, size AA
Typical battery life in operation from -5 to +35°C:
(if often operated outside of the above temperature range battery life can be reduced to 75%)
6 years
Battery life in continuous on-line mode with interval 1 minute: 4 years
Battery life in continuous on-line mode with interval 10 seconds: 1 year
Protection: IP67 - protected against influence of temporary immersion into water
Warranty: 2 years
เว็บไซต์ที่เกี่ยวข้อง: http://www.datalogger.cz/english/current-voltage-datalogger.htm
Tell a Friend
CMP8510 อุปกรณ์วัดค่าอุณหภูมิ -30 ํC ถึง 80 ํC แบบไม่มีหน้าจอ
รหัสสินค้า: 000091
การเชื่อมต่อ: เชื่อมต่อกับ PC ผ่าน LAN
การรับประกัน: 2 ปี
รายละเอียด:

ใช้งานร่วมกับอุปกรณ์สื่อสาร, ในโรงงานอุตสาหกรรม และระบบปรับอากาศ

Industrial Ethernet Thermometer
- low cost intelligent www sensor

Also known as: industrial Ethernet, remote server environment monitoring, computer room monitor, data center thermometer, temperature IP sensor, computer room temperature alert. Online Ethernet thermometer is designed for online temperature measurement and measurement from up to four external temperature cable probes. Measurement in degrees Celsius and degrees Fahrenheit supported. Online Ethernet thermometer is built in a durable plastic case.

APPLICATIONS - online measuring and control of temperature at:

  • building HVAC management
  • building HVAC automation
  • industrial Ethernet
  • server rooms
  • telecommunication devices
  • warehouses
  • glasshouses
  • manufacturers
  • museums, archives, galleries
  • air-conditioned rooms

PRELIMINARY !

Easy creation of online data acquisition system from Ethernet thermometers by using new low cost software Comet Database Sensor Monitor - see also Accessories.


www online Ethernet thermometer

MODES OF COMMUNICATION
Modbus TCP: Modbus TCP protocol enables to read measured values, set alarm limits, adjust the probe.
Telnet: Port 9999 enables to set alarm limits (lower, upper limits, hysteresis for temperature and time delay), e-mail addresses, SNMP addresses, probe description, refresh of www pages (10s to 65535s), set storing interval to history (10s to 65535s), enable each communication channel. Capacity of the history memory is 600 values. Password protection of this port is enabled. Automatic IP address assignment from DHCP server is also enabled.
WWW pages: User selectable design of www pages enabling to display curve of measurement history. User can design the look of www pages and temperature history.
Online temperature, humidity, pressure in Roznov, Czech Republic
from similar Comet internet www sensor T7511
SNMP: It is possible to read actual values and alarm limits. In case of alarm creation warning message (trap) is sent to addresses defined by the user (maximum three addresses).
SOAP: Online transmitter enables to send actual measured data in the format of SOAP message to selected web server in preset interval 10-65535 s.

Online thermometer enables to monitor measured values. In case of exceeding of adjusted limits warning message can be sent to specified addresses.
There are the following options of alarm indication:

ALARM INDICATION OPTIONS
E-mail: In case of alarm creation warning e-mail message is sent to addresses defined by the user (maximum three addresses) or via e-mail to SMS message.
SNMP: In case of exceeding of adjusted temperature limits alarm is activated and warning trap is sent to user specified IP addresses (maximum 3 addresses).
WWW pages: In case of exceeding of adjusted temperature limits active alarm is displayed on www page.
syslog: Online thermometer enables to send text messages to selected syslog server after different events appear. E.g. after thermometer restart, alarm activation, communication error with SNTP, after firmware change, after alarm termination, after communication error with SOAP server.

Synchronizing of time and record to www table and temperature history is enabled by SNTP via Internet.

TECHNICAL PARAMETERS
Supported physical units: degrees Celsius, degrees Fahrenheit
Supported temperature sensors: Digital temperature sensor Dallas DS18B20
Measuring range: -55 to +80°C, -30 to +80°C model P8510
Accuracy: ±0.5°C from -10 to +80°C, ±0.8°C model P8510
Resolution: 0.1°C
Sampling interval: 2 s
Memory capacity for temperature history: 600 values, export to CSV file enabled
Interval for temperature history record: adjustable from 10 s to 18 h
Temperature operating range: -30 to +80°C
Temperature operating range of LCD display: readable to operating temperature +70°C, it is recommended to switch OFF the LCD over +70°C
Protection of the case: IP30
LAN connection: RJ-45 connector
Power: 5Vdc, maximum consumption 250mA.
For power over Ethernet any PoE splitter is necessary
e.g. DWL-P50 from D-Link company
Power connector: co-axial, diameter 5.5 x 2.1 mm
Dimensions of the P8510 case: 88 x 126 x 39,5 mm (W x H x D)
Dimensions of the P8511,P8541 case: 88 x 74 x 39,5 mm (W x H x D)
Weight: 240 g
Warranty: two years

เว็บไซต์ที่เกี่ยวข้อง: http://www.datalogger.cz/english/Ethernet-thermometer.htm
Tell a Friend
CMH4531R อุปกรณ์วัดอุณหภูมิด้วยโพรบ -200 ํC ถึง 600 ํC พร้อม relay output 2 จุด
รหัสสินค้า: 000131
การเชื่อมต่อ: เชื่อมต่อกับ PC ผ่านพอร์ท LAN
การรับประกัน: สินค้ารับประกัน 2 ปี
รายละเอียด:

ตรวจสอบและแจ้งเตือนอุณหภูมิของอุปกรณ์ใน rack serverและบันทึกสัญญาณ binary 3 จุด

Rack mount server environment monitor Hx531R

Also known as: remote server environment monitoring, computer room monitor, data center thermometer, temperature humidity IP sensor, computer room temperature alert.

 

server environment monitor

  • temperature
  • humidity
  • power presence
  • flood
  • smoke
  • air flow
  • room entry

Server monitoring system is designed for 19-inch rack mounting, the height is one rack unit - 1U.
Model H4531R is prepared for connection of external Pt1000 temperature probe and models H3531R, H7534R are equipped with 1 meter temperature + humidity probe. Unit also contains three binary inputs for detection of two-state events - e.g. power presence, water, smoke, airflow, glass break detection, door contact.
Rack unit provides 5Vdc and 12dc power supply for external all sensors and detectors.
Large dual line LCD for simultaneous display of temperature, humidity is an advantage. Parameters are easy adjustable from transmitter keyboard or from the computer.
State-of-the-art capacitive polymer sensor ensures excellent calibration long term stability, inertia against water and condensation.
Environmental monitor is equipped with two relay outputs for alarm indication or control of external devices. Each relay can be assigned to any measured value.

 

NEW !

Easy creation of online data acquisition system from Ethernet sensors by using new low cost software Comet SWR009 Database Sensor Monitor - see also Accessories.



online monitoring
 

APPLICATIONS - online monitoring of temperature, humidity, power, flood, smoke, airflow, room entry at:

  • server and computer rooms
  • data centers
  • rack monitoring
  • industrial Ethernet
  • building management and automation
  • telecommunication devices
MODES OF COMMUNICATION
Modbus TCP: Modbus TCP protocol enables to read measured values and binary input states, set alarm limits, adjust the probe.
Telnet: Port 9999 enables to set alarm limits (lower, upper limits, hysteresis for measured values and time delay), e-mail addresses, SNMP addresses, probe description, refresh of www pages (10s to 65535s), set storing interval to history (10s to 65535s), enable each communication channel. Capacity of the history memory is 100 sets of temperature, humidity, pressure + computed values. Password protection of this port is enabled. Automatic IP address assignment from DHCP server is also enabled.
WWW pages: User selectable design of www pages enabling to display curve of measurement history and binary input states. User can design the look of www pages and temperature, humidity, pressure + computed values history.

Temperature, humidity, pressure in Roznov p.R., Czech Republic
from online www internet sensor T7511

SNMP: It is possible to read actual values, alarm limits and binary input states. In case of alarm creation warning message (trap) is sent to addresses defined by the user (maximum three addresses).
SOAP: Online transmitter enables to send actual measured data in the format of SOAP message to selected web server in preset interval 10-65535 s.

Online transmitter enables to monitor measured values and binary input states. In case of exceeding of adjusted limits warning message can be sent to specified addresses.
There are the following options of alarm indication:

ALARM INDICATION OPTIONS
E-mail: In case of alarm creation warning e-mail message is sent to addresses defined by the user (maximum three addresses) or via e-mail to SMS message. Basic SMTP autentization is supported.
SNMP: In case of exceeding of adjusted temperature, humidity, pressure + computed value limits or binary input states alarm is activated and warning trap is sent to user specified IP addresses (maximum 3 addresses).
WWW pages: In case of exceeding of adjusted temperature, humidity, pressure + computed value limits or binary input states active alarm is displayed on www page.
syslog: Online transmitter enables to send text messages to selected syslog server after different events appear. E.g. after transmitter restart, alarm activation, communication error with SNTP, after firmware change, after alarm termination, after communication error with SOAP server.

Synchronizing of time and record to www table and measured values history is enabled by SNTP via Internet.

TECHNICAL PARAMETERS OF THE ONLINE SENSOR
Maximum switching voltage, current, power of relay output: 50V, 2A, 60VA
Operating relative humidity range: 0 to 100%
Accuracy of relative humidity measurement: ±2.5% relative humidity from 5 to 95% at 23°C
Temperature measurement accuracy: ±0.4°C
Available temperature units: degrees Celsius, Fahrenheit
Accuracy and range of barometric pressure output: ± 1.3hPa at 23°C
range: 600 to 1100hPa
Temperature operating range of case with electronics: -30 to +80°C
Temperature operating range of LCD display: readable to operating temperature +70°C, it is recommended to switch OFF the LCD over +70°C
Range of RH sensor temperature compensation: -30 to +105°C
Signal for binary inputs: from voltage-less contact, open collector or two-state voltage signal.
Inputs are not galvanically isolated.
Minimum pulse length at binary input: 500 ms (shorter pulse may not be detected)
Voltage at open contact: 3.3 V
Low voltage level: 0 to +0.2 V
High voltage level: +3.0 to +30V
Filtering ability of sensor cover: 0.025mm - filter with stainless steel mesh
Protection: IP30
LAN connection: RJ-45 connector
Power: 12 Vdc, maximum consumption 250mA.
For power over Ethernet any PoE splitter is necessary e.g. DWL-P50 from D-Link company
Power connector: co-axial, diameter 5.5 x 2.1 mm
Dimensions of the case: 483 x 44 x 45 mm (W x H x D), one rack unit 1U
Weight: approximately 1100 g
Warranty: two years
เว็บไซต์ที่เกี่ยวข้อง: http://www.datalogger.cz/english/server-environment-monitor.htm
Tell a Friend
CMH0430 อุปกรณ์วัดค่าอุณหภูมิและสัญญาณ binary 3 จุด -30 ํC ถึง 80 ํC
รหัสสินค้า: 000115
การเชื่อมต่อ: Relay output (2A) 2 จุด ส่งข้อมูลผ่าน RS485
การรับประกัน: 2 ปี
รายละเอียด:

ใช้สำหรับงานควบคุมอุณหภูมิและเครื่องจักรภายในโรงงานอุตสาหกรรม

Temperature, Humidity, Pressure Regulators with Relay and RS485 Outputs

  • temperature
  • barometric pressure
  • relative humidity
  • dew point temperature
  • absolute humidity
  • specific humidity
  • mixing ratio
  • specific enthalpy
  • three binary inputs

Humidistats are designed for two-state control of e.g. heating, ventilation, humidifier, dehumidifier, etc.
Transmitter is equipped with two relay outputs for alarm indication or control of external devices. Each relay can be assigned to any measured or computed value. For each relay setting of delay, hysteresis, audible alarm is enabled.
Measured values are converted to galvanically isolated RS485 serial output.
Fully equipped transmitter contains temperature, humidity, pressure sensors.
Measured temperature and relative humidity is recalculated to other humidity interpretations - dew point temperature, absolute humidity, specific humidity, mixing ratio or specific enthalpy.
Reading and pressure output are available in these units: hPa, kPa, mbar, mmHg, inHg, inH2O, PSI, oz/in2. Degrees Celsius and Fahrenheit are user selectable.
Parameters are easy adjustable from regulator keyboard or from the computer. Large dual line LCD for simultaneous display of temperature, pressure or relative humidity or other calculated humidity interpretation is an advantage.
State-of-the-art capacitive polymer sensor ensures excellent calibration long term stability, inertia against water and condensation. Transmitter is designed for use in non-aggressive environment.
Transmitter is also equipped with three binary inputs for detection of two-state events - e.g. water, smoke, glass break detection, door contact.

HUMIDISTAT APPLICATIONS

- temperature and humidity control
- monitoring of temperature, humidity, pressure and three binary signals at:

  • building management and automation
  • server rooms
  • telecommunication devices
  • warehouses, glasshouses
  • manufacturers
  • museums, archives, galleries
  • air-conditioned rooms, HVAC
  • weather stations
COMMON TECHNICAL PARAMETERS
 
 
 
Maximum switching voltage, current, power of relay output:
  50V, 2A, 60VA
Audible alarm: from built-in beeper - switchable
Supported temperature units: degrees Celsius, degrees Fahrenheit
Accuracy of temperature measurement: ±0.4°C from -30 to +100°C, ±0.4% from reading over +100°C
Range of relative humidity measurement: 0 to 100%
Accuracy of relative humidity measurement: ±2.5% relative humidity from 5 to 95% at 23°C
Accuracy of temperature measurement: ±0.4°C from -30 to +100°C
±0.4% from reading over +100°C
Accuracy and measuring range of dew-point temperature:
- for more details see
graphs
±1,5 °C at ambient temperature T < 25°C and RH>30%
range -60 to +80 °C
Accuracy and measuring range of absolute humidity: ±3g/m3 at ambient temperature T < 40°C
range 0 to 400 g/m3
Accuracy and measuring range of specific humidity: ±2g/kg at ambient temperature T < 35°C
range 0 to 550 g/kg
Accuracy and measuring range of mixing ratio: ±2g/kg at ambient temperature T < 35°C
range 0 to 995 g/kg
Accuracy and measuring range of specific enthalpy: ± 3kJ/kg at ambient temperature T < 25°C
range: 0 to 995 kJ/kg
Operating temperature range of the case with electronics: -30 to +80°C
Operating temperature range of LCD display: readable up to operating temperature +70°C, it is recommended to switch off LCD over +70°C
Range of temperature compensation of RH sensor: -30 to +125°C
Signal for binary inputs: from voltage-less contact, open collector or two-state voltage signal.
Inputs are not galvanically isolated.
Minimum pulse length at binary input: 500 ms (shorter pulse may not be detected)
Voltage at open contact: 3.3 V
Low voltage level: 0 to +0.2 V
High voltage level: +3.0 to +30V
Filtering ability of sensor cover: 0.025mm - filter from stainless steel mesh
Protection - temperature and humidity transmitters: IP65 electronics with terminals,
IP40 humidity sensors
Protection - transmitters measuring pressure: IP54 electronics with terminals,
IP40 humidity and temperature sensors
Power: 9-30Vdc
Dimensions of the case: 135 x 136 x 45 mm (W x H x D)
Warranty: 2 years

เว็บไซต์ที่เกี่ยวข้อง: http://www.datalogger.cz/english/humidistat-rs485.htm
Tell a Friend
CMH3331อุปกรณ์วัดค่าอุณหภูมิ, ความชื้นผ่านโพรบ และสัญญาณ binary 3 จุด -30 ํC ถึง 105 ํC
รหัสสินค้า: 000171
การเชื่อมต่อ: Relay output (2A) 2 จุด ส่งข้อมูลผ่าน RS232
การรับประกัน: สินค้ารับประกัน 2 ปี
รายละเอียด:

ใช้สำหรับงานควบคุมอุณหภูมิและเครื่องจักรภายในโรงงานอุตสาหกรรม

Temperature, Humidity, Pressure Regulators with Relay and RS232 Outputs

Humidistat H3331, H7331

  • temperature
  • barometric pressure
  • relative humidity
  • dew point temperature
  • absolute humidity
  • specific humidity
  • mixing ratio
  • specific enthalpy
  • three binary inputs

Humidistats are designed for two-state control of e.g. heating, ventilation, humidifier, dehumidifier, etc.
Transmitter is equipped with two relay outputs for alarm indication or control of external devices. Each relay can be assigned to any measured or computed value. For each relay setting of delay, hysteresis, audible alarm is enabled.
Measured values are converted to RS232 serial output.
Fully equipped transmitter contains temperature, humidity, pressure sensors.
Measured temperature and relative humidity is recalculated to other humidity interpretations - dew point temperature, absolute humidity, specific humidity, mixing ratio or specific enthalpy.
Reading and pressure output are available in these units: hPa, kPa, mbar, mmHg, inHg, inH2O, PSI, oz/in2. Degrees Celsius and Fahrenheit are user selectable.
Parameters are easy adjustable from regulator keyboard or from the computer. Large dual line LCD for simultaneous display of temperature, pressure or relative humidity or other calculated humidity interpretation is an advantage.
State-of-the-art capacitive polymer sensor ensures excellent calibration long term stability, inertia against water and condensation. Transmitter is designed for use in non-aggressive environment.
Transmitter is also equipped with three binary inputs for detection of two-state events - e.g. water, smoke, glass break detection, door contact.

HUMIDISTAT APPLICATIONS

- temperature and humidity control
- monitoring of temperature, humidity, pressure and three binary signals at:

  • building management and automation
  • server rooms
  • telecommunication devices
  • warehouses, glasshouses
  • manufacturers
  • museums, archives, galleries
  • air-conditioned rooms, HVAC
  • weather stations
COMMON TECHNICAL PARAMETERS
 
Maximum switching voltage, current, power of relay output: 50V, 2A, 60VA
Audible alarm: from built-in beeper - switchable
Supported temperature units: degrees Celsius, degrees Fahrenheit
Accuracy of temperature measurement: ±0.4°C from -30 to +100°C, ±0.4% from reading over +100°C
Range of relative humidity measurement: 0 to 100%
Accuracy of relative humidity measurement: ±2.5% relative humidity from 5 to 95% at 23°C
Accuracy of temperature measurement: ±0.4°C from -30 to +100°C
±0.4% from reading over +100°C
   
Accuracy and measuring range of absolute humidity: ±3g/m3 at ambient temperature T < 40°C
range 0 to 400 g/m3
Accuracy and measuring range of specific humidity: ±2g/kg at ambient temperature T < 35°C
range 0 to 550 g/kg
Accuracy and measuring range of mixing ratio: ±2g/kg at ambient temperature T < 35°C
range 0 to 995 g/kg
Accuracy and measuring range of specific enthalpy: ± 3kJ/kg at ambient temperature T < 25°C
range: 0 to 995 kJ/kg
Operating temperature range of the case with electronics: -30 to +80°C
Operating temperature range of LCD display: readable up to operating temperature +70°C, it is recommended to switch off LCD over +70°C
Range of temperature compensation of RH sensor: -30 to +125°C
Signal for binary inputs: from voltage-less contact, open collector or two-state voltage signal.
Inputs are not galvanically isolated.
Minimum pulse length at binary input: 500 ms (shorter pulse may not be detected)
Voltage at open contact: 3.3 V
Low voltage level: 0 to +0.2 V
High voltage level: +3.0 to +30V
Filtering ability of sensor cover: 0.025mm - filter from stainless steel mesh
Protection - temperature and humidity transmitters: IP65 electronics with terminals,
IP40 humidity sensors
Protection - transmitters measuring pressure: IP54 electronics with terminals,
IP40 humidity and temperature sensors
Power: 9-30Vdc
Dimensions of the case: 135 x 136 x 45 mm (W x H x D)
Warranty: 2 years

เว็บไซต์ที่เกี่ยวข้อง: http://www.cometsystem.cz/english/humidistat-rs232.htm
Tell a Friend
CMT0218 อุปกรณ์วัดค่าอุณหภูมิ 0 ํC ถึง 50 ํC ส่งสัญญาณ 0-10V
รหัสสินค้า: 000189
การเชื่อมต่อ: เชื่อมต่อกับ PC ผ่านพอร์ท USB
การรับประกัน: สินค้ารับประกัน2ปี
รายละเอียด:

ใช้งานภายในอาคาร, office,โรงแรม และพิพิธภัณฑ์

Interior temperature, humidity, barometric pressure sensor with 0 to 10V output

  • temperature
  • relative humidity
  • dew point temperature
  • absolute humidity
  • specific humidity
  • mixing ratio
  • specific enthalpy
  • barometric pressure

Temperature, humidity, barometric pressure transmitters are specially designed for use in exacting interiors in building energy management and HVAC systems. Are designed for easy installation on ordinary KU68 wiring boxes for household switches and sockets.
Large dual line LCD for simultaneous display of temperature, humidity or barometric pressure is an advantage. Display is possible to switch off.
Computerized design ensures temperature compensation of the humidity and pressure sensors and fail indication. Transmitters are designed for use in non-aggressive environment.

APPLICATIONS -
measuring of temperature, humidity and pressure at:

  • residential and official buildings
  • building energy management and HVAC systems
  • pharmaceutical industry
  • museums, archives, galleries
TECHNICAL PARAMETERS
 
Operating temperature range: 0 to +50°C
Operating relative humidity range: 5 to 95%RH
Voltage output: 0 to 10V
Configuration of outputs and output range: user adjustable from the PC
Power: 15-30Vdc, maximum consumption 20mA
Dimensions: 88 x 106 x 33 mm
Material of the case: ABS
Color: white
Protection: IP20
Warranty: 2 years
เว็บไซต์ที่เกี่ยวข้อง: http://www.datalogger.cz/english/interior-temperature-humidity-pressure-0-10v.htm
Tell a Friend
CMMS5 อุปกรณ์บันทึกค่าพร้อมระบบแจ้งเตือน เลือกค่าที่บันทึกได้ 16 ค่า และ relay output แบบไม่มีหน้าจอ
รหัสสินค้า: 000191
การเชื่อมต่อ: เชื่อมต่อกับ PC ผ่านพอร์ท USB, LAN หรือส่งข้อมูลไร้สายผ่านโมเด็ม
การรับประกัน: สินค้ารับประกัน 2 ปี
รายละเอียด:

ใช้งานใน datacenter, ระบบ automation ในโรงงาน, ห้องทดลองหรือในอุตสาหกรรมยา

Data acquisition system MS5D, MS5

The complete solution for monitoring of temperature, humidity and other values especially in following applications:

  • Food and beverages industry (HACCP)
  • Pharmaceutical industry (GMP)
  • Blood stations, pharmacies
  • Horticulture and cultivation of plants
  • HVAC (heating, ventilation, air conditioning, cooling
  • Building and energy management
  • Building automation
  • Research and development
  • Laboratories (GLP)

Single-channel to sixteen-channel data loggers are designed for recording of values from transducers of variety of quantities, alarm state indication, and process control. Data logger with transducers configured accordingly to client order can measure analog signals, frequency, count impulses, evaluate two-state quantities and read data from devices compatible with Modbus RTU and ADAM Advantech protocol. Input signals are connected to removable terminal block located on the logger upper side. Analyzing of the record is enabled after data download to the personal computer by means of the included program via USB, RS232, Ethernet or GSM modem. Local or remote online data presentation is also enabled.

 

Free program for monitoring system for Windows is ready to download.

data-acquisition-system

Data acquisition system especially enables:

  • online data acquisition by means of the Ethernet interface. Communication via: SNMP, SOAP, internet www pages
  • to get information from data logger by means of the SMS messages - actual values, alarms, memory occupation and others - as response to SMS request from the user and after alarm creation at the logger. Data logger should be connected via GSM modem supporting SMS.
  • to configure individually each input channel for measurement, alarm evaluation and data logging, including individual data logging interval for each input.
  • each input channel can be individually programmed for different modes of record (continuous record, time dependent record, record only if specified logic conditions are matched, record triggered by external signal, etc.).
  • to set up to four different logic conditions for each channel to active alarm. Each condition compares measured values from inputs with set limits. It is possible to set hysteresis and delay of condition validity.
  • to assign to each input channel name of actual recorded process to identify monitored object (e.g. type of monitored product). It is enabled to select this name from data logger keyboard during the operation.
  • to indicate alarm state after matching defined combination up to four alarms from any inputs.
  • to store several configuration profiles (all logger parameters setting) for different measuring tasks and select profiles from logger keyboard.
  • Input signals are connected by means of the removeable terminal connector. Each input channel has three terminals - including shielding.
   
   
TECHNICAL PARAMETERS OF DATA LOGGER
Memory type: internal SRAM, backed-up by Lithium battery
Total memory capacity: 2MB (up to 480 000 values)
Data logging modes: noncyclic - logging stops after filling the memory
cyclic - after filling memory oldest data is overwritten by new
Data logging interval: adjustable individually for all input channels from 1 second to 24 hours
Real time clock: year, leap year, month, day, hour, minute, second, backed-up by Lithium battery
Input measured values (1 to 16 inputs): are defined for each channel by installed input modules (see table) accordingly to user requirements
Resolution of the AD converter (analog channels): 16 bits, conversion duration approximately 60ms/channel
Supported interface for communication with computer:
  • RS232 (RxD,TxD,RTS,CTS,GND), cable up to 15 m - included. Enables direct connection with the PC or via line modem or GSM modem.
  • USB interface - included
  • RS485 - cable up to 1200 m, galvanically isolated, possibility of connection of several data loggers to one communication link - included
  • Ethernet interface LAN - optional. Online communication via: SNMP, SOAP, internet www pages
Communication speed: 9600, 19200, 57600, 115200 Bd
Outputs for alarm indication: 1) Red LED at the side of the case, 32 LEDs - only MS5D data logger
2) Relay max. 8A/250Vac, switching-over contact
3) Voltage signal 0V/4.8V, maximum current 50mA, output designed for connection of external audio indication unit or telephone voice dialer
4) Alarm can be signalled also by e-mail message, SNMP trap, SMS - please see optional accessory
Power: 9 to 30Vdc, 24Vdc recommended
Operating temperature range: 0 to +50°C
Dimensions including connectors: 215 x 225 x 60 mm
Protection: IP20
Warranty: 2 years

Communication interfaces:

communication interfaces


TYPES OF LOGGER INPUTS
Inputs marked with asterisk (*) are available also as galvanically isolated - see notes below table.
Numb. Type Measured value Accuracy Note
M1001 A0 dc current 4 to 20 mA ±0.1% FS With source approximately 21V for two-wire transducers with current loop (e.g. temperature and humidity transducers Comet). Only galvanic not isolated.
M1002 A1* dc current 4 to 20 mA ±0.1% FS for passive sensing of current
M1003 B0* dc current 0 to 20mA ±0.1% FS  
M1004 B1* dc current 0 to 1A ±0.1% FS  
M1005 B2* dc current 0 to 5A ±0.1% FS  
M1006 C0 ac current 0 to 20mA ±1% FS galvanic isolated only
M1007 C1 ac current 0 to 1A ±1% FS galvanic isolated only
M1008 C2 ac current 0 to 5A ±1% FS galvanic isolated only
M1009 D0* dc voltage 0 to 100mV ±0.1% FS  
M1010 D1* dc voltage 0 to 1V ±0.1% FS  
M1011 D2* dc voltage 0 to 10V ±0.1% FS  
M1056 D5* dc voltage -10V to +10V ±0,1% FS
(± 20 mV)
 
M1055 D4* dc voltage 0 to 75V ±0.1% FS  
M1013 E0 ac voltage 0 to 100mV ±1% FS galvanic isolated only
M1014 E1 ac voltage 0 to 1V ±1% FS galvanic isolated only
M1015 E2 ac voltage 0 to 10V ±1% FS galvanic isolated only
M1059 E4 ac voltage 0 to 50V ±1% FS galvanically isolated
M1017 F* measurement of resistance (specify the range) ±0.1% FS two-wire connection
M1018 J* input for Nickel RTD temperature sensor Ni1000, 6180 ppm/°C, range -50 to +250°C -50 to 100°C ±0.2°C 100 to 250°C ±0.2% from reading  
M1019 K* input for Platinum RTD temperature sensor Pt100, range -140 to +600°C -140 to+100°C ±0.2°C 100 to 600°C ±0.2% from reading two-wire connection
M1020 K1* input for Platinum RTD temperature sensor Pt1000, range -140 to +600°C -140 to+100°C ±0.2°C 100 to 600°C ±0.2% from reading two-wire connection
M1060 K3 precise input for Platinum RTD temperature sensor Pt1000
range -10 to +50°C
±0.06°C Two-wire connection.
Only galvanically not isolated.
M1021 N* thermocouple K (NiCr-Ni) range -70 to +1300°C ±0.3% from reading + 1.5°C linearized, cold junction compensation
M1054 T* thermocouple T (Cu-CuNi) range -200 to +400°C ±0.3% from reading + 1.5°C linearized, cold junction compensation
M1022 O* thermocouple J (Fe-Co) range -200 to 750°C ±0.3% from reading + 1.5°C linearized, cold junction compensation
M1023 P* thermocouple S (Pt10%Rh-Pt), range 0 to 1700°C ±0.3% from reading + 1.5°C from +200 to +1700°C linearized, cold junction compensation
M1024 Q* thermocouple B (Pt30%Rh-Pt), range +100 to +1800°C ±0.3% from reading + 1.0°C from +300 to +1800°C linearized, without cold junction compensation
M1041 S* binary input for potential-less contacts maximum resistance of closed contact: 1000 ohms minimum duration for recording: 200ms
M1042 S1 binary voltage input voltage for "switched ON" state: 3 to 30Vdc, input current in the"switched ON" state: 1 to 9mA-depending on the applied voltage, minimum duration for indication of change: 200ms, galvanic isolated
M1044 CTU counter input for voltage signal voltage for "HIGH" state (for counter status change): 3 to 24Vdc maximum pulse frequency 5kHz, backed-up operation, galvanic isolated
M1045 CTK counter input for potential-less contacts and open collector maximum pulse frequency 5kHz, programmable filter of pulse ringing, backed-up operation during power mains failure, maximum resistance of closed contact: 10 kohms minimum resistance of open contact: 250 kohms, galvanic unisolated
M1047 FU input for measurement of frequency of voltage signal 0 to 5kHz, resolution 1Hz, accuracy ±(0.2% from reading + 1Hz) input voltage for state "H": 3 to 24Vdc input current in state "H": approximately 7mA minimum duration of input impuls: 30us, galvanic isolated
M1048 FK input for measurement of frequency of contact switching 0 to 5kHz, resolution 1Hz, accuracy ±(0.2% from reading + 1Hz) maximum resistance of closed contact: 10 kohms minimum resistance of open contact: 250 kohms, minimum duration of input pulse: 30us, galvanic unisolated
M1061 RP input for serial signal RS485 for devices supporting Modbus RTU or Advantech protocol E.g. measurement from Comet Tx41x temperature, humidity, pressure, transmitters.
Only devices using same communication protocol and same communication speed can be connected to one RP module.
Several RP modules can be installed in MS5 data logger.
More information is in Manual Appendixes. Maximum speed 115200Bd.
Galvanic isolated.
Not compatible with older models MS234+.

Notes:
Inputs marked ( * ) are not galvanic isolated and have common ground.
These inputs are available also as galvanic isolated.
Galvanic isolated analog inputs are marked with letter G following the name of input type (e.g. input for passive measurement of current 4-20mA - type A1 - with galvanic isolation is marked A1G).
Galvanic isolation is not designed as safety protection.

Input module for monitoring system

Input module A0 4-20mA

Input module for monitoring system

Counter input module CTU

Larger photo of monitoring system

View of power and communication connectors

Larger photo of monitoring system

View of power and input connectors
- three terminals/input


 

เว็บไซต์ที่เกี่ยวข้อง: http://www.datalogger.cz/english/monitoring-system-ms5.htm
Tell a Friend
CMC0111 มิเตอร์วัดอุณหภูมิ -50 ํC ถึง 250 ํC
รหัสสินค้า: 000120
การเชื่อมต่อ: -
การรับประกัน: สินค้ารับประกัน 2 ปี
รายละเอียด:

มิเตอร์วัดอุณหภูมิ -50 ํC ถึง 250 ํC ความแม่นยำสูง ใช้ Probe RTD

Thermometers Commeter for temperature measurement -50 to +250°C

Thermometers are designed for direct temperature measurement.

Advantages:

  • included traceable calibration certificate
  • dual line LCD display with special symbols
  • adjustable dual alarm with audio indication for each channel
  • memory of minimum and maximum values
  • function Hold - manual storing of actual values for later displaying
TECHNICAL PARAMETERS
Operating temperature range: -30 to +65°C
Temperature input: RTD Ni1000/6180ppm
Accuracy of the input without probe: ±0.2°C from -50 to +100°C, ±0.2% from reading from 100 to 250°C
Power: 9V battery
Typical battery life: 6 months
Dimensions without probes: 141 x 71 x 27mm
Warranty: 2 years

เว็บไซต์ที่เกี่ยวข้อง: http://www.datalogger.cz/english/thermometer-Ni1000.htm
Tell a Friend
CMR0110E เครื่องวัดอุณหภูมิบันทึกค่าได้ 32000 ค่า วัดอุณหภูมิในช่วง -30 ํC ถึง 70 ํC แบบไม่มีหน้าจอ
รหัสสินค้า: 000134
การเชื่อมต่อ: เชื่อมต่อกับ PC ผ่านพอร์ท USB
การรับประกัน: สินค้ารับประกัน 2 ปี
รายละเอียด:

ใช้ในอุตสาหกรรมอาหารและกระบวนการผลิต รวมถึงการควบคุมอุณหภูมิในห้องเก็บสินค้าและวัตถุดิบ

Thermometer - Temperature Data Logger

Thermometers are designed for record of temperature or temperature together with signal from a contact. Values are stored to a non volatile electronic memory. Data transfer to the personal computer for further analysis is performed via USB, RS232, GSM or Ethernet interface by means of a proper adapter.

Main thermometer applications:

  • Transport of food or pharmaceuticals
  • Food and beverage industry (HACCP)
  • Pharmaceutical industry
  • Blood stations, pharmacies
  • Horticulture and cultivation of plants
  • HVAC (heating, ventilation, air conditioning, cooling)
  • Building and energy management
  • Research and development
  • Laboratories (GLP)
  • Warehouses
  • Technological processes
  • Museums, archives, galleries
  • TÜV SÜD certified to conform to EN 12830,
    Class 1 and EN 13486, Class 1 for the transport of food

Thermometer advantages:

  • included traceable calibration certificate from the manufacturer - Comet
  • fast data transfer to the PC (full memory for approximately 30s)
  • variability of connection to the computer - USB, RS232, Ethernet, GSM modem
  • permanent connection to the PC enabled, data is possible to download even during logging
  • large data memory 32000 values
  • large dual line display with special symbols, switchable
  • optional display of minimum and maximum measured values (reset of min/max memory from PC or by magnet)
  • dual level alarm is enabled for each channel, alarm is indicated by blinking of the value on the LCD display or LED diode
  • two alarm modes are enabled: instant or with memory (detected alarm is indicated permanently till alarm memory is cleared from the PC)
  • robust watertight case
  • easy installation, locking enabled
  • low power consumption from battery, battery life up to 7 years
  • indication of remaining battery life, easy replacement of the battery
  • standard temperature sensor is Pt1000/3850ppm, switchable to Ni1000/6180ppm external probes at range -50 to +150°C
  • it is possible to combine temperature measurement with logging of contact state (e.g. door contact)
  • logging start/stop is enabled in several ways: at certain time and date programmed from computer, by delivered magnet or depending on binary input state (type S0841)
  • also special logging mode is enabled, when logging runs only, if some of measured values are out of adjusted alarm limits
  • each logger is possible to describe with text of maximum 32 characters
  • each channel is possible to describe with text of maximum 16 characters
  • password protection is enabled to prevent unauthorized manipulation with logger
COMMON TECHNICAL PARAMETERS
Operating temperature range of loggers R0110, R0110E without display: -40 to +80°C logger R0110
-30 to +70°C logger R0110E
Operating temperature range of loggers S0xxx with display: -30 to +70°C
Accuracy of the Pt1000/3850ppm input without probe - loggers S0xxx : ±0.2°C from -50 do +100°C
±0.2% from reading from +100 to +260°C
±0.4% from reading from –90 to –50°C
Accuracy of temperature measurement of internal sensor: ±0.4°C (except economy models S0110E, R0110E)
Resolution of the reading: 0.1°C
Real time clock: year, leap year, month, day, hour, minute, second
Data logging interval: adjustable from 10s to 24h
Display and alarm refresh: each 10 s
Total memory capacity: 32000 values in noncyclic logging mode
Data logging modes: noncyclic – logging stops after filling the memory
cyclic – after filling memory oldest data is overwritten by new
Dimensions without connectors: loggers with display 93x64x29mm
loggers without display 93x64x26mm
Power: Lithium battery 3,6V, size AA
Typical battery life in operation from -5 to +35°C: 7 years R0110, R0110E
6 years S01xx
5 years S0141 and S0841
Battery life in continuous on-line mode with interval 1 minute: reduced to 70% of the above lives
Battery life in continuous on-line mode with interval 10 seconds: 1 year
Protection: IP67 - protected against influence of temporary immersion into water
Warranty: 2 years
เว็บไซต์ที่เกี่ยวข้อง: http://www.datalogger.cz/english/temperature-dataloggers.htm
Tell a Friend
A. T. Pro Engineer Co., Ltd.
19/65 ม.11 ถนนเลียบวารี แขวงโคกแฝด เขตหนองจอก กทม. กรุงเทพมหานคร ไทย
โทรศัพท์: 02-7536739 แฟกซ์: 02-7536739 มือถือ: 081-9167954
เว็บไซต์: http://www.atnine.com/
ดูแผนที่ร้านผ่าน Google Earth
อีเมล์ติดต่อกับร้านค้า
หัวเรื่อง : *
ชื่อของคุณ : *
อีเมล์ของคุณ : *
รายละเอียด : *
 
Page Views Shop: