PreSonus : R80 (Pair)

PreSonus : R80 (Pair)

150W Active 2-way Studio Monitor with 8" Kevlar Woofer and 6.8" AMT Ribbon Tweeter (Pair)

ลำโพงมอนิเตอร์ สำหรับงานบันทึกเสียงในห้อง Studio แบบ 2 ทาง ขนาด 8" และ 6.8" AMT Ribbon Tweeter มาพร้อมแอมป์ Class D ในตัว กำลังขับ 150 วัตต์ รุ่นใหม่ล่าสุดจาก PreSonus เหมาะสำหรับงาน Mix หรือ Mastering อย่างมืออาชีพ

PreSonus R80 active studio monitors are fitted with a custom 6.8" Air Motion Transformer ribbon tweeter that delivers superb transient response and ultra-low distortion. The R80's custom-coated 8" woven Kevlar LF driver provides more dynamic output than conventional woofer designs, thanks in part to the rigid cone's superior ability to maintain a more constant dispersion pattern across its frequency response range. Amplified by 100-watt RMS of Class D amplification driving the woofer and 50-watt RMS driving the tweeter, the R80 gives you exceptionally transparent sound with reduced reflections.

Superior transient response.

In order to dampen resonance peaks at higher frequencies, conventional dome tweeters are injected with fluid to raise their mass, sacrificing transient response time. By contrast, the custom-designed AMT tweeter in the R80 uses an incredibly thin, folded Kapton membrane (< 0.01 mm) with an inlayed aluminum circuit functioning as the voice coil, allowing the tweeter to move at the same instant as the electric current. The resulting reactive response time provides marked clarity and superior transient reproduction.

Wide, consistent stereo image.

An unfolded AMT tweeter diaphragm provides 8 to 13 times the projection area of a traditional 1-inch dome tweeter, enabling R80 monitors to provide a much wider stereo soundstage than traditional designs. At the same time, the R80 provides a very limited vertical dispersion, which helps to reduce reflections from the ceiling and desktop that can cause phase coherence issues. Because it’s less subject to room-anomaly interference, the R80 reacts predictably and sounds consistent from room to room.

Transparent sound.

The R80 utilizes an 8-inch, custom-coated, woven Kevlar® low-frequency driver. This rigid cone maintains a more consistent dispersion pattern across its frequency response range. Biamped and driven by a 150W Class D amplifier—making the R series some of the most powerful monitors in their category—these monitors deliver an open, clear, and less fatiguing listening experience.

Have it your way.

You can customize the R80 in several ways. It’s available with black or blue faceplates to fit your studio décor. With balanced XLR, balanced ¼” TRS, and unbalanced RCA line-level inputs, it’s easy to feed audio to your R80 monitors from a mixer, an interface, a media player, or almost any other line-level source. And R series monitors offer user-adjustable contour features for optimizing the monitors for your mixing space. This enables full integration into any studio environment.

Accuracy defined.

The R80’s AMT monitor design provides lifelike sonic reproduction that will allow you to hear the room in your recordings. Its transparent sound and responsive transient reproduction makes it an ideal solution for anyone who is mixing high-resolution audio.

Features

Components and construction

• 2-way active AMT design provides articulate high-frequency response and wide stereo imaging
• Custom-designed, 6.8-inch, AMT ribbon tweeter responds to the subtlest waveforms and the highest frequencies
• 8-inch Kevlar LF drivers provide transparent mid- and low-frequency reproduction for clean sound and punchy bass
• Balanced XLR and ¼-inch TRS plus unbalanced RCA inputs provide flexibility for seamless integration into any environment

User controls

• Acoustic Space settings (Linear, -1.5 dB, -3 dB, -6 dB) compensate for room placement

​Power and safety

• Biamped 150W RMS (LF = 100W, HF = 50W), Class D power amplifier with switching power supply
• RF interference, output current limiting, over temperature, turn-on/off transient, and subsonic filter protection
• Energy Conservation Mode (with enable/disable) lowers standby power to <0.5W
• External mains fuse
• Internal power supply with IEC connector

Specifications